The surfaces to be applied should be smooth, strong, lining and finish coat. The surfaces to be painted should be cleaned from all kinds of dirt, dust, mold oil, loose stratification and necessary surface smoothing process. Concrete, gross concrete and new plastered surfaces should be followed for set times (28 days). Prior to application of primer on old painted water-solvent based surfaces, light sanding of the entire surface should not be forgotten. In order to increase the coverage of
the paint on very dirty surfaces, one coat of stain-repellent paint should be applied and then one or two coats of topcoat should be applied. Care must be taken that the ambient and surface temperatures are between + 5°C and + 35°C during application and until the product is completely dry, surfaces must be protected from freezing. It can be applied by brush, roller and spray.